CONOSCICI

Notizie DICSA

New Mini Power packs catalogue

DICSA designes and manufactures a wide range of mini power packs configurations (adapted to your requirements or pre-assembled). In Dicsa we are able to adapt to the most demanding requirements and we are able to provide you. Assembly can be done both vertical and horizontal. We can offer you mini power packs with DC electric motors in both 12V and 24V, as well as single phase and three-phases electric motors ranging from 0,3kW to 4kW. DICSA also put at your disposal a wide range of pre-assemble mini power pack ready for use. They gather the most standard applications, providing a simple yet very complete solution for the most recurrent market demands.

DOWNLOAD MINI POWER PACKS CATALOGUE

minicnetrales-banco

/Hydraulic power packs customization/

 

At DICSA we manufacture with you in mind, that is why we offer you the possibility to design your own hydraulic power units adapted to your requirements, satisfying your specific needs by providing exclusive solutions.  Mini power packs are assembled upon request. No matter your sector activity or the application required, the technical staff of DICSA will study your case individually. Mini power packs will be evaluated and validated with the most convenient design that meets the expectations of our customers and business partners.

 

Our hydraulic units are powered by either DC motors in 12 and 24 Volts, or in single phase and three phase AC electric motors suitable for many different applications and scenarios: dock leveller, tail lift, aerial work platform, hydraulic press and scissor lift, among others.

minicentrales-elements

Our technical staff can design and define the mini power pack according to your requirements, but also follow your guidelines or suggest improvements, as well as modify a current power pack adapted to your new working conditions.

 

/ Single & double acting Mini Power Packs /

 

The hydraulic unit pushes the load its way up in the Single acting Mini Power Packs. The

load can be held in place by means of a 2/2 solenoid cartridge valve and eventually the load goes down by gravity, the descent speed can be adjusted by turning the restrictor valve. On the other hand, in the double acting Mini Power Packs the hydraulic unit can push or pull the rod of a double acting cylinder. This opens the possibility for more complex manoeuvres. This configuration can also be translated to hydraulic motors turning in 2 different directions.

 

/Pre-assembled Mini power packs /

 

DICSA offers you also a wide range of pre-assemble mini power pack ready for use. They gather the most standard applications providing a simple yet very complete solution for the most recurrent market demands. 

We can offer you mini powerpacks with DC electric motors in both 12V and 24V, as well as single phase and three-phases electric motors. Complete your unit with the tank that is more convenient for you and do not forget to include the solenoid valves if you happen to require one or few of them.

 

/Certified quality/

 

All hydraulic units are tested in our state-of-the-art test bench. Test reports with working conditions and results are always included and delivered attached with any power pack assembled and delivered from our facilities. This test is performed in accordance with the specifications set by the costumer. After running a programmed set of duty cycles, the maximum pressure and the flow rate working range are determined.  Oil temperature is monitored during test, it can be modified upon request, as well as the duty cycle: load and time.

 

/Test bench/

 

State of the art DICSA test bench can perform analysis on a very wide range of working conditions. Flow up to 25 l/min, pressure up to 350 bar, and power supply in both AC or DC up to 4kW. Because in DICSA we are committed to certified quality.

  

DOWNLOAD CATALOGUE